|  Home |  Company  |  SiteMap  |  ContactUs  |  Certification  |

|     Home     |     About Us     |     Products     |     Certification     |     Contact Us     |     Site Map     |

 

 

 

Flexible Plate Heater

- Silicone Rubber Heater

- Aluminum Jacket Heater

- Film Heater

Heating Cable

- CONSTER

- Belt Heater

- Cord Heater

Silicone Wire

- SRGW

- KC Wire

- CJS Series

- Multi Cable

- GB Wire

- CJKC Series

- CJMC Series

Silicone Tubing

- SRT

- SRGT

- GRT

- GT

- CJC Series

Silicone Rubber Heater Flexible Plate Heater

 

 

Summary

Thin, lightweight and very soft heaters can be processed in any shape as your opponent is close to other parts as possible is the best efficiency hoist.

 

- Operating temperature: -62  to 260

- Heater thickness: 1.5mm ~ 2.0mm

- Maximum production standard: unlimited length, 2,000 mm width

- Primary Use: Heating industry across the two can be used almost anywhere you need

 

- Consisting of a flat flexible heater as flat, Plate Type, Jacket Type, Etched Foil Type and so on.

- Flexibility and  Processed into the desired shape is free

- The appearance of the heater, resistance heating element, such as the pattern depends on the customer's request

- Temperature Switch, Thermal Switch, including built-in safety device

- Thermo Couple, PT100 such sensors can be maintained at the desired temperature

 

 

 

 

WIRE-WOUND TYPE

 

- heating element in the form of Cord, winding resistance wire on Fiberglass Yarn make desired resistance to the sheet bend the desired pattern array, making

- Physical strength, excellent flexibility and good

- Repeated bending does not significantly affected in

- applied to silicone Rubber Heater

 

Etched-foil type

 

- You want to design a circuit board etching method for forming

- Wire-Wound type represents more than twice the high power density

- Almost every design is designed to

- Kapton, Mylar Heater applied to

 

 

 

- Specification

Maximum production standards

Wire-Wound

(width)2,000mm*(Unlimited length.)

Etched-Foil

450mm*700mm

Minimum production standards

Wire-Wound

25mm*50mm

Etched-Foil

10mm*10mm(Heat per unit)

Standard thickness

Wire-Wound

1.5mm~3.0mm

Etched-Foil

1.5mm~3.0mm

Standard Weight

Wire-Wound

0.25g/cm2

Maximum operating temperature

260(0.8w/cm2)

CE certified maximum operating temperature

300(1w/cm2)

Minimum operating temperature

-62

Maximum operating voltage

380VAC(Contact the use of more than a separate)

Maximum Power

See the power density graph

Standard Resistance Tolerance

±7%

Dimension Tolerance

Below 150mm

±3mm

150mm~455mm

±5mm

455mm~915mm

±8mm

more than 915mm

±2%

 

- Continous operating time

Temperature

Available time

Remarks

150

15,000Hrs

 

200

7,500Hrs

 

260

2,000Hrs

 

316

100Hrs

 

* Experimental data as the data is data in the literature.The use of real user environment can be used to change the time.